Following the above link will take you to a secure site to purchase this phone
The Clarity XLC3.4+ cordless telephone is a loud, simple and easy-to-use amplified cordless phone featuring up to 50 decibels of amplification, and a loud and clear speakerphone. Additional features include:
Large, high contrast buttons that are easy to see and press
Numbers are spoken as they are pressed
Caller ID will show up on the screen, and is also announced
Ability to interface with hearing aids (neckloop add-on required)
How to set up your Clarity XLC3.4+ Amplified Cordless Telephone
Remove base from package; pull yellow tab in the direction of the arrow
Hold one end of your XLC3.4+’s long phone line cord tightly. The correct end to hold should already be plugged into your phone’s jack. Simultaneously pull the other end of the phone cord away from the phone, unraveling it and allowing you to plug that end of the cord into a wall telephone outlet.
Plug the loose end of the phone cord into the wall telephone outlet.
Hold one end of your phone’s white power adapter cord tightly. The correct end to hold should already be plugged into the back of your telephone base unit. Simultaneously pull the other end of the adapter cord away from the phone, unraveling it and allowing you to plug that end of the cord into a wall electrical outlet.
Plug white power adapter cord on left rear of the base into a wall electrical outlet.
Remove handset from package.
Pull the handset’s battery tab located on the bottom of the device in the direction of the arrow.
Place the handset in the base charger. The batteries in the handset must be fully charged for 16 hours before using the telephone for the first time.
Lift handset and press TALK to test. If you hear a dial tone, your telephone is ready for use. If not, check all connections again.
The full manual for the XLC3.4+ Cordless Telephone is available here.
A quick setup and reference guide is available here.