Following the above link will take you to a secure site to purchase this phone
How to set up and use your Clarity BT914
Pair and connect your Bluetooth enabled cell phone
To use a Bluetooth enabled cell phone with your BT914, you must first pair and connect your Bluetooth cell phone(s) with the telephone base. All BT914 handsets can be used to make or answer calls on the cell line. Your cell line is the telephone line associated with your cell phone service.
Bluetooth wireless technology operates within a short range (a maximum of approximately 30 feet). When you pair a Bluetooth cell phone to the telephone base, place your Bluetooth cell phone closer to the telephone base to maintain sufficient signal strength. For optimal performance, keep your cell phone within 15 feet of the telephone base while using the cell line.
Choose a slot to pair the cell phone. Press and hold Bluetooth 1 or Bluetooth 2/Headset on the telephone base until you hear a confirmation tone, and the Bluetooth 1 or Bluetooth 2/Headset light flashes.
Turn on the Bluetooth feature of your cell phone. Once your cell phone finds your Clarity Phone (Clarity BT914), press the appropriate key on your cell phone to continue the pairing process.
Your cell phone may prompt you to enter the PIN of the telephone base. The default PIN of the telephone base is 0000.
When the cell phone is connected to the telephone base, the corresponding status icon (Bluetooth 1 or Bluetooth 2) displays. The corresponding device light (Bluetooth 1 or Bluetooth 2/Headset) turns on.
If the pairing fails, turn off the Bluetooth feature on your cell phone and on the BT914 by pressing Bluetooth 1 or Bluetooth 2/Headset. Then repeat the steps above to pair and connect again. In some cases, it may take you a few attempts to complete the pairing process.
Pair and connect your Bluetooth enable headset
Press MENU on the phone when it is not in use.
Press the UP or DOWN arrow keys to scroll to Bluetooth, and then press SELECT.
Press the UP or DOWN arrow keys to scroll to Add Bluetooth headset, and then press SELECT. The screen displays Search headset…
Set your headset to discoverable mode. Once your handset finds your headset, press SELECT.
– Enter the PIN of your headset if required. The PIN for most Bluetooth devices is 0000 (refer to the user’s manual of your headset), and then press SELECT.
When the headset is successfully paired and connected to the telephone base, the Bluetooth 2 icon displays. The Bluetooth 2/Headset light turns on.
Download contacts from your Bluetooth cell phone
Press MENU when the phone is not in use.
Scroll to Bluetooth, and then press SELECT.
Scroll to Download PB, and then press SELECT.
Scroll to select the desired cell phone, and then press SELECT.
Indicators
Battery indicators | Battery status | Action |
|---|---|---|
The screen is blank, or shows Put in charger and the battery symbol flashes. | The battery has no charge or very little charge. The handset cannot be used. | Charge without interruption (at least 30 minutes) |
The screen shows Low Battery and the battery symbol flashes. | The battery has enough charge to be used for a short time. | Charge without interruption (at least 30 minutes) |
The screen shows Handset X. | The battery is charged. | To keep the battery charged, place it in the telephone base or charger when not in use. |
For more information, please see full User Guide:
https://clarityproducts.com/content/userguides/BT914%20UserGuideEnglish%20RevF.pdf