Make sure your TV Adapter is connected to your TV and plugged in. You should see a blinking BLUE light.
Open and close the battery doors on both of your hearing aids (see video 1). If you have rechargeable hearing aids, hold the volume down button for 3 seconds to turn them off, then do this again to turn them on. Now they will be in pairing mode for 3 minutes (see video 2).
Place both hearing aids on top of the TV Adapter
Pairing is completed when the TV indicator light is solid BLUE. It will remain blue for 30 seconds, then change colors. If the RCA cables were used, both indicator lights should turn green. If the optical (TOSLINK) cable was used, one indicator light should be green, and the other blue.
Follow this guide to properly connect the TV Adapter to your Television: https://telesupport.hearingaidhelp.ca/support/solutions/articles/31000135815-connecting-tv-adapter-to-your-tv
Once a TV Adapter has been paired with your hearing aids it will be available as a program in your hearing aids.
There are a few ways to change programs in your hearing aids:
Press and hold the button on your hearing aids for a brief 2 seconds (see 3rd video).
Click the third button on your remote to change programs.
Press and hold the plus button on your Connect clip for 3 seconds.
*The program cycle will depend on the programs already available in your hearing aids. If you have 2 programs before pairing with the TV Adapter then a 3rd program will be made*
Pairing Oticon Opn hearing aids with traditional batteries with TV Adapter
Pairing Oticon Opn S hearing aids with rechargeable batteries with TV Adapter
How to change the program on an Oticon miniRITE hearing aid