The instructions below explain how to adjust the volume and change programs using the push button on your Oticon Reveal hearing aids. Because the button is small and located on the back of the hearing aid, some users may find it difficult to press. If you have trouble using the push button, contact your hearing care professional. They may recommend using a remote control or the Oticon Companion app to make these adjustments more easily.
Volume Control Instructions
Pressing the Right hearing aid push button and immediately releasing it RAISES the volume.
Pressing the Left hearing aid push button and immediately releasing it LOWERS the volume.
Program Changing Instructions
Most users have a single default program. However, your hearing care professional may add additional programs for specific listening situations, such as noisy environments. These programs are typically reviewed during your fitting appointment.
To change programs, press and hold the button for 1 to 2 seconds, then release it. It may take a little practice to get the timing right.
Your hearing aids will play a series of beeps to indicate the selected program:
1 beep = Program 1 (default program)
2 beeps = Program 2
3 beeps = Program 3, and so on
To switch to another program, press and hold the button for 1 to 2 seconds and release it again. Each time you do this, the hearing aids will move to the next available program. After the last program, the hearing aids will return to the first program.
IMPORTANT NOTE:
If the button is held for too long, that hearing aid will switch OFF. To turn it back ON, simply press and hold the button again until the GREEN light starts to flash, OR insert the hearing aid back into its charger, and remove it again after approx. 30 seconds.