The video shown below explains how to pair
your Signia StreamLine Mic with your Hearing Aids
Turn off the StreamLine Mic: hold down the Mult-function button until the power indicator is off. Takes approximately 6 seconds.
Restart the hearing aids by opening and closing the battery door on the hearing aids. The hearing aids are now in pairing mode.
Turn on the StreamLine Mic: hold down the Multi-function button until the power light turns Green. Takes about 3 seconds.
The Status light will start to flash Yellow. Place both hearing aids and StreamLine Mic close together on a table.
The pairing process starts automatically. Pairing is finished when the Status light is a Solid Yellow.
You can refer to Signia’s StreamLine Mic User Guide here